VeraTrack team · 2026-10-11 · 7 min read
A paper register at the front desk tells you very little. Half the members forget to sign, handwriting is hard to read, and nobody has time to count who stopped coming. Digital check-in fixes that, and you no longer need an expensive machine to do it.
This guide covers three common methods (QR at the desk, self check-in with an entrance QR, and face check-in) and how to set each one up with a phone or tablet. The steps are general, so they apply to most gym software.
Pick the right method for your gym
There is no single best method. It depends on whether you have someone at the desk and how busy your peak hours are.
| Method | What you need | Best for |
|---|---|---|
| QR scanned at the desk | One phone or tablet at reception | Gyms with staff at the desk all day |
| Self check-in (entrance QR) | A printed poster or a screen at the entrance | Busy mornings, unstaffed hours |
| Face check-in | A phone or tablet on a stand | Members who forget phones; fast, hands-free entry |
| Biometric machine | A face or fingerprint device | Gyms that already own one or control a door |
Tip: Most gyms end up using two methods: one main method plus a fallback (search by name or phone) for the member who forgot everything.
Before you start: clean your member list
Check-in is only as good as the member data behind it. Spend an hour on this first:
- Make sure every active member has a correct plan end date.
- Add phone numbers, so staff can search when needed.
- Add a clear profile photo, front-facing, in good light. Photos help staff recognise members and can be used for face check-in later.
If your members are still in a register or spreadsheet, read Excel vs gym software for how to move the data across without losing anything.
Method 1: QR scanned at the desk
Each member has a personal QR code on their phone (or a printed card). Staff scan it with the camera of the desk phone or tablet.
- Turn on QR attendance in your attendance settings.
- Decide which codes work. Printed cards are convenient, but a live code that refreshes every few seconds in the member portal can't be shared as a screenshot.
- Open the check-in screen on the desk device and allow camera access in the browser.
- If the tablet sits on a stand facing the member, use the front camera. If staff hold the phone and point it at members, switch to the back camera.
- Test with three or four staff members' codes before opening to everyone.
Tip: Keep a search box on the same screen. When a member forgot their phone, staff can check them in by name, phone or member code in a few seconds.
Method 2: Self check-in with an entrance QR
Here the QR belongs to the gym, not the member. Members scan it with their own phone camera when they walk in. No app is needed, which makes this the cheapest method to run.
- Switch on self check-in in your attendance settings.
- Set the gym's location while standing inside the gym, and choose a radius (for example 100 or 150 metres). This stops a member checking in from home with a photo of the poster.
- Print the check-in poster and stick it at eye level near the entrance, or show the entrance QR on a tablet or TV.
- Tell members on WhatsApp and with a sign at the desk: "Scan the QR with your camera when you arrive."
- For the first week, have staff remind people at the door until it becomes a habit.
Members will need to allow location on their phone the first time. A small number will struggle, so keep desk check-in available as a fallback.
Method 3: Face check-in on a phone or tablet
Face check-in means a member just looks at a phone or tablet at the entrance. It is fast and nobody forgets their face. It is also personal data, so do it properly.
Get consent first
Tell members what you are doing, and only enrol those who agree. A good setup stores a faceprint (a set of numbers) rather than a new photo, and lets any member ask for their face data to be deleted at any time. Put a short notice at the desk and in your joining form.
Set it up
- Enrol members' faces. Either use their existing profile photos (after confirming consent) or capture a face at the desk: the member looks straight at the camera in good light for a few seconds.
- Recapture anyone whose photo didn't have a clear face, such as sunglasses, a side angle or a group photo.
- Turn on the blink check. Asking members to blink stops someone checking in by holding up a printed photo. If it slows the queue too much, you can switch it off.
- Put the phone or tablet on a stand at face height near the entrance, with light falling on faces, not behind them. A bright window behind the member makes recognition harder.
- Keep a fallback. If a face isn't recognised, the member should check in at the desk.
In VeraTrack, face check-in runs in the browser or the VeraTrack app on any phone or tablet, and staff can also hold the phone and use the back camera during a rush.
What about biometric machines?
If you already own a face or fingerprint machine, you don't have to throw it away. Many machines (for example eSSL and ZKTeco models) can push check-ins to cloud software through a setting usually called ADMS or Cloud Server. You enter the server address on the machine, enrol each member on the device with a matching ID, and check-ins appear in your software within a minute.
Decide what happens with expired members
This is where check-in starts paying for itself. When a member's plan has ended or they owe money, the system can do one of two things:
- Let them in, warn the staff. Friendlier, and staff can collect payment at the desk.
- Don't let them in. Stricter, best when the desk is busy or unstaffed.
Most small gyms start with "warn" so members aren't embarrassed at the door, then move to "block" for members who are badly overdue. Also set a duplicate-scan window (for example 30 minutes) so a member who scans twice isn't counted twice.
Use the data every week
Check-in data is only useful if you look at it. Once a week, pull the list of active members who haven't come in for 7 to 10 days and get someone to message them. That one habit catches people before they quietly quit. If you run a gym, our page for gyms shows how this fits with renewals. Our guide on reducing member drop-off has more ideas, and you can estimate what lapsed members are costing you with the gym revenue leak calculator.
If you'd like QR, self check-in and face check-in on the phone you already have, you can try VeraTrack free for 7 days with no card needed.
Do members need to install an app for QR check-in?
Not for self check-in: members scan the gym's QR with their normal phone camera. For desk scanning, members show a QR from the member portal or app, or a printed card.
Is face check-in safe for member privacy?
It can be, if you get consent, store only a faceprint rather than extra photos, and delete a member's face data whenever they ask. Always offer another way to check in.
Can I use an old phone or tablet for face check-in?
Usually yes, as long as the camera works and the browser allows camera access. Place it at face height with good front lighting for the best results.
Try VeraTrack free for 7 days · Book a free demo
Related: How to reduce member drop-off at your gym: 9 things that work · Excel vs gym software: when the register stops working · Gym management software in India: what to look for (2026 checklist)